Surface analyses of low carbon steel and stainless steel in geothermal synthetic Na-Ca-Cl brine saturated with CO2 - Université de Pau et des Pays de l'Adour Accéder directement au contenu
Article Dans Une Revue Results in Surfaces and Interfaces Année : 2022

Surface analyses of low carbon steel and stainless steel in geothermal synthetic Na-Ca-Cl brine saturated with CO2

Résumé

In a geothermal power plant, certain precautions should be taken to ensure a good efficiency. Indeed, it is important to avoid degassing of the geothermal fluid and to prevent corrosion issues. To address these problems, the gas-liquid equilibrium has to be controlled and the characteristics (composition, temperature.. .) of the fluid known as well as the nature of the material used. For this reason, in this paper, a laboratory-scale device was developed in order to simulate natural like conditions and achieve corrosion tests. The corrosion behaviour of two materials, a carbon steel (DC01) and a stainless steel (304 L), has been investigated. The testing materials have been exposed to a synthetic brine which composition is similar to the Upper Rhine Graben water formation. The brine was saturated with 2 MPa of CO 2 and heated up to 50 • C and 100 • C. Surfaces of tested metals were analysed by spectroscopic (XPS) and microscopic (SEM) methods in order to characterize corrosion products and to get more information onto the corrosion mechanisms process. The use of the laboratory prototype coupled with surface analysis methods allowed to better understand CO 2 corrosion in geothermal environment. The role of the brine chemistry and the impact of temperature and CO 2 dissolved concentration have been studied in this work. Indeed, different natures of corrosion products regarding the material composition and microstructure have been highlighted. A mixture of CaCO 3 and FeCO 3 scale is identified on the carbon steel whereas the stainless steel exhibits a mixture of Cr(OH) 3 and FeCO 3 on its surface.
Fichier principal
Vignette du fichier
1-s2.0-S2666845922000022-main.pdf (2.76 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-04163145 , version 1 (17-07-2023)

Identifiants

Citer

Marie Poulain, Jean-Charles Dupin, Kessein Eric Tillous, Jean-Bernard Ledeuil, Jean-Paul Serin, et al.. Surface analyses of low carbon steel and stainless steel in geothermal synthetic Na-Ca-Cl brine saturated with CO2. Results in Surfaces and Interfaces, 2022, 7, pp.100040. ⟨10.1016/j.rsurfi.2022.100040⟩. ⟨hal-04163145⟩
4 Consultations
22 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More